How to configure L2TP VPN in Windows 8 with TorGuard -
In this tutorial, we'll walk through some steps how to configure a VPN L2TP service connection on a Windows 8 compatible computer. Remember, TorGuards 24/7 support team is waiting to help with any questions you may have during setup.
- To start, click "Open Network and Sharing Center" from the network icon in the taskbar (1) or click on " network and sharing center "in the Control Panel.
 - Then we'll click "Set up a new connection or network" (2).
 - Select "Connect to a workplace" (3) and click "Next" (4).
 - Select "Use my Internet connection (VPN) "(5).
 - in the" Internet address "(6) server field type of IP VPN TorGuard you want to connect. you must check email you received when you paid on behalf TorGuard VPN. you will find the available servers. in the "Display Name" (7) type "TorGuard VPN (L2TP)."
Click " Create "(8).  - Click on the monitor icon (9) on the bottom corner on the right.
 - right click on the "TorGuard VPN (L2TP)" connection (10), and choose "Properties" (11) in the menu.
 - Select the "Security" tab (12) and for "VPN Type" select "Layer 2 Tunneling Protocol with IPsec (L2TP / IPsec)" (13).
Click on "Advanced Settings" (14)  - Enter preshared key :. "TorGuard vpn" (15) and click "OK" (16) for both windows.
 - Click again on the monitor icon in the bottom corner on the right and click "Connect" (17) "TorGuard VPN (L2TP)".
 - In the following fields enter your username VPN (18) and the password (19) and click "OK". (20)
 - When next to "TorGuard VPN (L2TP)" says "Connected" (21) your connection was created.
 |
0 Komentar