How to configure OpenVPN with DD-WRT using the VPN service TorGuard

How to configure OpenVPN with DD-WRT using the VPN service TorGuard -

First, confirm that DD-WRT is supported on your router.Click here to search the DD-WRT website

Enter the make and model of your router and press Enter.

To install DD-WRT using OpenVPN on your router, follow step by step instructions if

provided on the DD-WRT website.

Installing DD-WRT on your router should be done carefully.

DD-WRT installation on your router can 'brick' your router

If not properly installed and can void the warranty of your router.

Once DD-WRT is installed, connect your computer to the router Wireless or via an Ethernet cable.

Enter the local IP address of the router into the URL address bar of your Web browser and log in to your router.

By default, this is usually 192.168.1.1 (if you specified a different local IP address, please use this IP address)

Note :. If you use more than one router on your network, you must change the router DDWRT

to a different address, such as 192.168.2.1 to avoid IP conflicts.

Once connected to the DD-WRT router web interface please click on the 'tab .

Click on "services" tab in the "VPN Services tab.

then, under OpenVPN server / daemon click "activate".

This is necessary to enable the OpenVPN status page. Click Apply Settings. .

Then, access the administration area and select the commands.

Download TorGuard DD-WRT startup scripts from the link below:

http://torguard.net/downloads/TorGuardDDWRT.zip

Unzip startup scripts and select the VPN server you want to connect by opening the file with a text editor.

Copy the entire contents of the selected startup script and paste it into the command window below.

Remember to replace "username" and "password" with your login TorGuard secure VPN.

Click "Save Start" and then "Run the commands" ..

.

There! Then we have to check the OpenVPN connection by clicking on the "Status" tab and then "OpenVPN" ...

You can see the current state of OpenVPN connection in the area -.

In our example, we can see the connection is valid by looking under "state" - CONNECTED :. SUCCESS

If you do not see output in the log, you may need to restart your router.

Congratulations! Now you are ready to use TorGuard using the OpenVPN protocol to encrypt your entire network and all connected devices using your DD-WRT router! Just visit whatismyip.com to confirm that your DD-WRT router is connected to TorGuard. If you have questions, please contact our support team. We're available 24/7/365 and will respond quickly.

Tweet